Yousame
Release time:2026-09-28Many corporate procurement managers share this confusion: custom work uniforms have just been distributed, and before long, employees report that after a few washes, seams come undone, collars go slack, and hems lose their shape... Is it a fabric issue or a workmanship issue? Today we'll explain it all at once, and teach you a few test methods you can do at home. ?
First, the conclusion: whether seams come undone or the garment loses shape depends on three core factors
1️⃣ Fabric composition and pre-shrinking treatment
If pure cotton fabric has not undergone pre-shrinking treatment, the shrinkage rate during the first machine wash can reach 5%-8%, and the garment will directly drop a size. Poly-cotton blends (such as a 65/35 ratio) are much more stable. Shenzhen YouSame Garments Co., Ltd. performs pre-shrinking and shape-setting treatment on fabrics before customization, controlling the shrinkage problem from the source.
2️⃣ Stitch density and stitching method
Industry standards require no fewer than 12 stitches per 3 centimeters, but some small workshops only do 8-9 stitches to rush production, and sparse stitching naturally makes seams come undone easily. YouSame uses four-thread overlock + double-needle reinforcement technology, and stress-bearing areas such as underarms and crotch are also reinforced with bar tacks, so they are not prone to bursting even after many machine washes.
3️⃣ Dyeing process and color fastness
For work uniforms with substandard color fastness, not only do they fade after machine washing, but the fibers also become brittle, accelerating deformation. Fabrics with reactive printing and dyeing can reach color fastness of grade 4 or above, remaining crisp and neat even after repeated washing.
So, how do you test whether the work uniforms you received are qualified?
? Test 1: Shrinkage rate test
Take a new work uniform, measure the garment length and chest circumference, and record them. Machine wash on the standard cycle with 30℃ warm water, let it air dry naturally, then measure again. If the shrinkage rate exceeds 3%, it is unqualified. Work uniforms customized by YouSame all undergo shrinkage rate testing before leaving the factory to ensure stable dimensions after delivery.
? Test 2: Stitch tensile strength test
Focus on checking three locations: underarms, shoulder seams, and crotch. Pinch both sides of the stitching with your hands and pull hard. If you hear a "rip" sound or see the needle holes enlarge, it means the stitch density is insufficient. Normal workmanship should withstand a pulling force of more than 15 kilograms.
? Test 3: Color fastness and pilling test
Use a white wet towel to rub forcefully on dark fabric 20 times, and see whether the towel picks up color. Then turn the garment inside out and machine wash it 3 times, observing whether the surface pills. Only if it does not pill and does not transfer color does it pass.
How should daily machine washing be done to extend service life?
✅ Wash inside out, zip zippers and fasten buttons
✅ Water temperature not exceeding 40℃, choose a gentle cycle
✅ Avoid bleach; neutral detergent is best
✅ Mainly dry in the shade; prolonged exposure to strong sunlight accelerates fiber aging
Shenzhen YouSame Garments Co., Ltd. has focused on corporate work uniform customization for more than ten years. From fabric selection to finished product leaving the factory, it goes through 6 quality inspection processes, and every work uniform undergoes machine wash simulation testing before being delivered to customers. If you are looking for a reliable custom manufacturer, you may want to learn about YouSame, which supports customization from samples, free sample mailing, and tiered bulk quotations.

Work uniforms are the face of a company and the daily battle gear of employees. Choose the right manufacturer, and these troublesome issues like seams coming undone and deformation after machine washing can be completely avoided. ?