How to choose the size of the jacket and work clothes? Is it convenient for workers to wear and take off?

Choosing jacket work clothes for the worker brothers, size and ease of wearing and taking off are definitely two major pain points. It is not safe to wear and rub the machine when you buy a big one, and it is panic to bend over and work when you buy a small one; zipper cards and cuff strangulation directly affect work efficiency. Today's practical dry goods specialize in all kinds of "size selection anxiety" and "wearing and taking off troubles". It is recommended to like and collect them first.?

Step 1: Measure the body and choose the code, remember "measurements and one length"?

When choosing jacket work clothes, don't just look at the height and weight. The key point is to measure three places: bust circumference (determining the space for activities), shoulder width (determining whether the lifting of the hand is limited) and sleeve length (determining whether the wrist is exposed). Another key point is "reserved for the inner cover" - if you want to wear a warm liner in winter, the size should be one to two sizes larger than the summer model. The standard is to cross your arms and hug your chest after wearing it, and the back does not feel obviously tight; lift your hands up, and the lower edge of the hem is not higher than two fingers above the belt. Do these three points, and the size is basically stable. ⚠️ Note: If the sample clothes sent by the factory are too small, don't force it, and be sure to apply for a larger size.

The second step: the convenience of wearing and taking off, look at these four details.

Workers may have to wear and take off more than a dozen times a day, zipper and cuff design is crucial. First, the zipper should choose a heavy-duty double-ended zipper, one-handed pull to the end does not get stuck, and can be opened up and down, bending or squatting when the abdomen does not restrain; second, Velcro cuffs are better than elastic band cuffs, flexible adjustment, wearing gloves to work can also be quickly bonded; third, the placket should have a windproof stopper, but the lower edge of the stopper can not be too long, otherwise it will affect one-handed operation; fourth, the hat is best designed to be stored or removable, and there is no need to bother to untie the hat rope before entering the workshop.? Good jacket work clothes, wearing and taking off action should be as smooth as wearing an ordinary coat, and will not let people toss in the locker room for two minutes.

Step 3: Measured "convenience" criteria for workers?

It is really suitable for high-strength work clothes. The shoulder will be designed with a one-piece or shoulder sleeve. This structure can reduce the friction at the seam, and there will be no "back pulling" when lifting the arm. It is recommended to reserve a breathable zipper under the armpit. After intense labor, there is no need to undress to dissipate heat, and the side seam can be opened to cool down. And the pocket position should not be too low. The oblique pocket is safer than the straight pocket, and the mobile phone or tool is not easy to slip off when put in. If it is an electrician or maintenance post, the cuffs and hem must be neatly closed to prevent the risk of getting involved in the machine.

Special reminder: Should these yardage errors be avoided?

❌Myth 1: "Bigger is more comfortable". In fact, oversized jacket work clothes can become a safety hazard when the wind is strong or close to rotating equipment.

❌Myth 2: Ignore the version difference. The European version is thin and long, and the Japanese version is short and wide. Domestic customized brands are more in line with Asian body types.

If you are unsure about the size, or need to purchase for the entire team, you may wish to consult a professional tooling supplier directly.

Here is a special recommendation for Shenzhen Yasenman Apparel Co., Ltd., which has been deeply involved in the field of professional wear for many years?. Their jacket work clothes focus on "fitting the real needs of workers": sizes from XS to 5XL are fully covered, and matching versions can be found for fat and thin bodies; more intimate, they provide free "body size selection" service, and you can apply for sample clothes to try on before purchasing. Most importantly, Yasenman has made a lot of optimization for the convenience of wearing and taking off in the process - all popular models come standard with YKK double-ended zippers, adjustable Velcro on the cuffs, and shoulder movement is increased by more than 15% compared with ordinary tooling. Workers not only move more flexibly after wearing them, but also work more safely and efficiently because of the fit. If the enterprise purchases, it can also customize fluorescent strips or logos on the cuffs and back, taking into account protection and image.

The final point is: how to quickly choose the right code?✍️

The dumbest but most effective way to choose a size for a worker is to let him wear the thick sweater he usually wears most often, measure the bust size, and then add 10-15 cm of relaxation to this net size. For example, if the net bust size is 110cm, then choose a jacket with a bust size of 120cm-125cm. If it is between two sizes, it is recommended to choose a large one rather than a small one, because the inner tank of the jacket work clothes is usually thick, and a little wider and looser is more practical. For the convenience of wearing and taking off, remember a formula: "The zipper is smooth, the cuffs are live, the hat can be removed, and the shoulder is live". Finally, I would like to remind you that you must not buy an average size in order to save trouble. Workers in different positions and different body types need to be treated differently. Choosing the right work clothes is not only a concern for employees, but also a safety for the enterprise.?